Just bought a One For All 6 with Home theater functions at walmart for $15.00 URC6012
A rather nice remote JP1 ready and already supports the 1005 code for dishplayers.. now the tough part was finding the advanced codes so that all the dishplayer functions could be setup. So I'll give everyone a break and type them in here.. One point about advanced codes.. they are three digits long and can range from 000-999. The advanced code represents and 8-bit value, therefore all of the advanced codes for a device are actually contained withing the range of 0-255. An advanced code greater than 255, while perfectly valid, is really just a duplicate code. For those that understand the concept of binary numbers, the eight least significant bits are all that matter. Therefore, an advanced code of 586 is the same as 330 and 074. The advanced codes I'll be listing will all be using 0-255 so if you find other codes that have the same listing just do the math as they will probably be the same code.
To use advanced codes press the sat then press and hold set until it blinks twice then enter 994 press set then enter the advanced code then press and hold the button you want to have that function. (*Some functions listed will already work without using the advanced codes.)
Important Dishplayer functions Play = 050 Rewind = 178 Fast Forward = 110 Stop = 238 Record = 177 Commercial Skip = 046 Pause = 142 Instant Reply = 078 Scroll Up = 241 Scroll Down = 113 Left = 145 Right = 017 Up = 081 Down = 209 Go = 016 Listings (Guide) = 012 Options = 208 Home = 144 Info = 076 View = 051 Back = 018 Recent = 080 Recall = 108 PIP = 236 Personal TV = 206 Power = 082 Channel Up = 014 Channel Down = 179