Post 30 made on Wednesday September 22, 1999 at 18:55 |
Roland S Historic Forum Post |
|
|
Chris,
Thanks for the idea about a "motion sensor disabler"! I'm not using yours exactly, but I'll give you 95% credit (I'll take 5%).
I have a utility room that I walk thru to get to the garage. I simply take another Hawkeye and set the motion detector to an unused unit code (for the explanation, I'll use B14, 4 minute delay to OFF) and place it in the utility room.
In my GARAGE.SCR, I add the line: IF B14>0 THEN END
When I leave the house by walking thru the utility room, I would activate the Hawkeye motion (B14=100). Then when the Hawkeye in the garage is activated, the GARAGE.SCR would get to this line and "END" (no lights on).
When I come home, the Hawkeye in the utility room would be obviously off (B14=0). Then when the Hawkeye in the garage is activated, the GARAGE.SCR would see the line as false and continue thru the code (lights on). Voila!
I haven't tried it yet, but I'll let you know. Luckily, I have an extra Hawkeye.
Thanks, Roland
|
|
|