Post 1 made on Saturday October 30, 2004 at 21:26 |
mikerodgers Lurking Member |
Joined: Posts: | October 2004 5 |
|
|
I recently installed a home theater system for a customer that is controlled by a MX800. The problem I am having is with his Yamaha RXV-2400's power on command. It will work via IR, but the RF base will not repeat the signal.
One thing I just thought of would be to use a simple toggle power command (if one exists) for the power on, while keeping the discrete power off command I have currently.
Any ideas on fixing this issue? Has anyone run into a problem like this before with the MRF-200?
Thanks everyone!
-Mike Rodgers
|
|
|