On May 22, 2007 at 23:29, bookaroni said...
| So Category 2 and verified to support 165MHz. I will
make sure before I purchase. I did go to Wireworld's website
and found nothing about either of these two points. But
since there is a 2 after the series 5 makes me think the
Silver Starlight 5 2 that the 2 might stand for category
2.
http://www.wireworldcable.com/And the review says nothing either:
[Link: hometheaterhifi.com]But it does mention thje connector is the sturdiest they
have tested so far. Which I think means a lot as I have
heard a lot about sloppy connectors.
Again, thanks for all your help.
Bruce
Bruce,
Just so you know, the 2 to the right, above the 5 indicates 5 squared, like in 5X5. That's how the name is pronounced, "5 Squared". I got that from a WireWorld press release for their HDMI cables.
I think that as long as a manufacturer indicates that it will carry a 1080p signal, that would be good enough. I don't believe you will find many manufacturers that have tested and verified their HDMI for category 2 and thoses that have the cost will likely be very expensive.
Enjoy your HT.
Eric
