So, went a different direction on this and used a pair of Gen2 5ac nanobeams aimed at a rocket ac5 / Omni antenna combo. Link one is about 2700’ and link two at 1600’. Off the router was getting 240/40 but at end point 40/40. Client is pretty happy with it but I was really hoping to get full throughput. The QAM constellation was pretty scattered on link one vs link two and though we have clear LoS we have it punching into a wooded area with about a 15’ x 15’ opening. Any ideas if the pattern would be wider than this? We’re pushing 20/40Mhz, and I read dropping to 10Mhz might help... Appreciate any input!