Your Universal Remote Control Center
Crestron Control Systems Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 7 made on Friday August 2, 2019 at 06:49
Select Member
February 2009
On July 31, 2019 at 12:01, SWOInstaller said...
Found the online help file, its ID number is 5838. This provides a few scenarios and resolutions.

Depending on the state of the xPanel and iPad will depend on what needs to be done to resolve. If only xpanel doesn't work yes this may be an SSL issue and it needs to be turned off, Text Console "SSL OFF" then reboot. If both xPanel and iPad are experiencing the same problem then there is likely an issue with the boot and you need to complete the program recovery procedure and do an initialize and restore on the unit to clear it. I had to do this once and it took a day for the hub to return to a working state (so far no issues since).

So it ended up that I had changed the CIP port and that was the issue. Apparently the Pyng hub is not forgiving if it is changed from the default port

Hosting Services by ipHouse