On May 3, 2019 at 08:21, Duct Tape said...
This is how URC recommends you set up your TRC1080's wifi:
1. set the remote to dhcp and reserve the ip in your router
2. create a 2.4GHz only wifi network for the remote and connect to that
3. use channel 1,6, or 11
4. set channelization to 20
5. use WPA2 Only/AES for encryption
6. don't put any spaces in your SSID
Hi Sir,
I am using a MRX-15(Static IP) and a TRC-180 (DHCP Reserved).
I have followed all the instructions that you have written for configuring the TRC-1080 Wifi. But Sometimes the TRC-1080 Lags in issuing Commands and I have to literally take out the battery and wait a few seconds and then reinstall the battery and then it starts working fine.
Can you please let me know what could be going wrong.
