On July 13, 2016 at 09:03, thecynic315 said...
Fios Router Lan 1 -> Your Router WAN 1
Set your Router to a new address with a different digit in the third octet.
Set your router's DHCP range to use that same digit.
On the Fios Router set the DMZ to the address you set your router to.
Plug everything on the network into your router.
Done.
I basically did all of that. Set the edgemax to a static IP. Didn't work. Set the Edgemax to DHCP for the WAN port, and it pulled a new IP in the same IP scheme that I set for DHCP on the Fios Router as it should, and that worked, without DMZ.