For anyone who'd like to check out my configuration file I thought I'd make the latest and greatest available for download. Download link available via the first post of this thread, the most recent addition to my configuration file being the front projector I added to my setup recently. Purchased a BenQ W1080ST (short throw) front projector and 120" portable screen a few months ago, a portable setup for use both indoors and outdoors.


(Additional pics of my setup can be viewed here.)

As it's not a permanent setup I'm just using direct IR to control the projector. That being said, I did add a cool new settings option to my System Status page per the below.



Note the new settings option "Display (Z1)" shown above. This settings option determines which Picture activity you are taken to while in Zone 1 when hitting up the Picture activity from a given page. By default the settings option is set to "Plasma". When I've got the front projector set up I'll simply tap the upper right corner of the screen to access the System Status page, then updating the settings option to "Projector" instead with a quick tap.

I'm happy to report as well that the available memory in the remote is still holding out nicely considering the number of DVD's and Blu-ray's I've added to my collection over the past year, my collection presently weighing in at 1,010 Blu-ray's and 2,226 DVD's. When initially overhauling my "DVD Juke" activity last summer I had gone from 0% memory free in the remote to 15% memory free. Some 14 months later now I still have 8% memory free in the remote. Not bad. Not bad at all. Talk about squeezing water out of a rock. :-P