My docking station seems to be broken. I have tested the transformer and it is working fine. My next port of call is replacing the fuse but I have a few questions first. I live in Ireland but have a US tsu6000.
1. From the forums I have found that the fuse has the following on it:-
bel ½ A
MS 125V
T500mA
Is this an acceptable replacement that I found on the Irish Radionics site (
[Link: radionics.ie]Description Fuse, F, submin, PCB, axial leaded, fast acting, 125Vac, 500mA
RS Stock No. 422-034
Manufacturer LITTELFUSE
Part No. 251.500HAT1
If not then were can I get the right one.
2. What size Torque bit do I need to open the dock.
3. Can I do this easily myself. I have a soldering iron and a solder sucker. Is there any danger of me damaging other parts of the board.
Before I do this is there anything else I should try first. The battery is getting low (3 bars) but when I put it on the dock the Low Power symbol starts to flash. Is this normal.