On May 25, 2013 at 05:59, Grit said...
I'm confused now about the MRX-1.
Is it possible to use the MRX-1 with a by adding an RFX-250 so it receives commands from an IR-based remote, such as the MX-890, MX-880, etc.? In which case, the MRX-1 will work just like an MRF-350?
And if THAT is possible, can you connect the MRX-1 via ethernet, and then use the MX-890 to control a device via IP (such as a Tivo) that is on the same network?
I had hoped I could use the MRX-1 this way, but I read/misread that it ONLY works as part of the MRX-10/Total Control system...
Hi Grit,
I tried using the MX-890 with MRX-1 using ethernet. It does not work. Looks like MX-890 is not a wifi or network remote. The network recognized the MRX-1 but looks like MX-890 does not send signals via wifi.
So I removed the ethernet connection and connected RFX-250 and using the MRX-1. (It works similar to MRF-350 as mentioned above). I am happy to use this for now so I can upgrade to iPad license in future.
