On December 28, 2012 at 22:20, mclean said...
Yes, I have 2 MRFA 600 dimmers in a 2 box gang. I have also created the "Main Lights" and "Sconces" buttons on my remote. But, when you go into either button control, both switches activate and all the light come on. So there isn't a seperation of either dimmer. They are both acting as single dimmer unit. I set the main lights to RF ID #1 and Sconces RF ID #2.
To further add to what I said, it sounds here like you most likely have both lighting devices set to the same lighting address. It's the only explanation for both dimmers responding to the codes in either device on the remote. I am not sure if you can change the lighting address on the 450 or not. Worst case, you would have to delete and reprogram just one of the devices on the remote, making sure to add it in with a different lighting address.
