I have an RC9200 that isn't very happy....

When I power on or reset it, the front panel says to tap in the top left corner and then in the bottom right, but on that 2nd tap it just emits a buzz and says "Calibration Failed".

I tried the Undead option in Tonto, but that didn't work.

I ran a firmware update on it and TouchEdit reported that as successful, but the problem still persists.

I connected it up to Hyperterm and when I reset it I get the following:

00
04
00
04
10
12
14
16
18


Booting...
BOOT,800000[00],RC9200 V2.1 AMD S8 ,11/13/2001,12:55:56,CRC SKP
22
PSOS,804000[00],V1.0 ,11/13/2001,12:55:30,CRC SKP
32
_SYS,810000[01],RC9200 V1.3.1 ,06/13/2002,10:26:29,CRC SKP
62
_APP,890000[09],RC9200 V1.2.2 ,06/13/2002,10:28:35,CRC SKP
42
_CCF,941000[20],N/A ,10/17/2001,09:43:58,CRC SKP
52
70
74
78
80
92
82
84
86
88
90
94
96
98

LZO real-time data compression library (v1.04, Mar 15 1998).
Copyright (C) 1996, 1997, 1998 Markus Franz Xaver Johannes Oberhumer

using embedded fonts
font 0 = Pronto 8
font 1 = Pronto 10
font 2 = Pronto 12
font 3 = Pronto 14
font 4 = Pronto 16
font 5 = Pronto 18
!

Can anybody help me out and let me know if it is recoverable?

Thanks very much!