You can probably program buttons on the remote to do the functions you need.
Test any of the below codes by (make sure the remote is set to the Yamaha devic mode)
1) Tapping setup (don't hold it)
2) Entering one of the below 5 digit numbers. That should cause the associated action at the receiver.
You can assign these numbers semi-permanently to buttons by
1) Press Setup until 2 blinks
2) Enter 994
3) Tap Setup
4) Enter a 5 digit numbe from below
5) tap the button you want to send this signal. Can't be a device button.
VCR 1 | 00058 |
Higher Preset Numbers | 00117 |
Lower Preset Numbers | 00121 |
Select Preset Group A - E | 00119 |
VCR 2 | 00123 |
Phono | 00116 |
CD | 00120 |
Tuner | 00118 |
Select Tuner | 00118 |
DVD | 00122 |
Tape | 00245 |
Vol+ | 00247 |
Vol- | 00251 |
Mute | 00244 |
Power On | 00248 |
Power Off | 00246 |
Power Toggle | 00250 |
+ | 00103 |
- | 00107 |
TV/DBS | 00100 |
V-Aux | 00104 |
Effect On/Off | 00102 |
Sleep | 00106 |
Test | 00192 |
Dolby Digital | 00061 |
Enhanced | 00065 |
Movie Theater | 00063 |
TV Sports | 00067 |
Rock | 00060 |
Jazz | 00064 |
Stadium | 00062 |
Disco | 00066 |
Church | 00125 |
Hall | 00129 |
Ch+ | 00253 |
Up_Arrow | 00253 |
Ch- | 00001 |
Down_Arrow | 00001 |
Speaker A | 00255 |
Speaker B | 00003 |
Down_Arrow | 00252 |
Up_Arrow | 00000 |
Play | 00254 |
Reverse_Play | 00002 |