The following page was printed from RemoteCentral.com:
Before you continue!
This file area has been replaced with a newer one! As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at: http://files.remotecentral.com
You are currently browsing through the Home Theater Master MX-700 & MX-800 and Complete Control MX-850, MX-900, MX-950, TX-1000 file area. To return to the beginning click here.
Once you have voted for a file you may not vote for that same file again. Remember that your vote is applied to all segments of a file. So, even if you may have only evaluated a single element, your rating should reflect the file as a whole. Below you will see all aspects of this file as entered in our database.
The file you are rating is as follows:
BlueWay KY32-K101
Designed for:
Home Theater Master MX-700/800/850 (Device)
Submitted by:
Ben Manton
Simple fan and air conditioning operations are included here, due to the very complex nature of the original remote. The original remote requires complete programming into the remote, and then subsequent transmission to the unit. This is obviously impossible with the more traditional style of the MX-800, but it is possible to set up some basic operations
Such as:
Off
On - Fan Only - Low On - Fan Only - Medium On - Fan Only - High
On - AirCon - Temp 16 Degrees (C) - Low On - AirCon - Temp 16 Degrees (C) - Med On - AirCon - Temp 16 Degrees (C) - High