Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Universal Remotes & RS232/IP Commands?
This thread has 2 replies. Displaying all posts.
Post 1 made on Sunday April 5, 2020 at 16:07
gciva
Junior Member
Joined:
Posts:
April 2020
2
Is there any way of enabling universal remotes such as Logitech's harmony unit to send out RS232 & IP commands?

The current setup includes:

1x Kramer Sierra 1616V5xl Component video matrix (RS232)
1x Yamaha A1080 receiver (IP)
2x xantech MRAUDIO8x8 speaker amplifiers (RS232)

(these are just the devices that comminicate via Rs232 or IP)

There are other devices such as set top boxes and TV's which will work via IR.

Currently, a Wyrestorm enado system is being used to send out these commands. However using a GUI on a mobile device is not easy to use as it lacks the tactile feel of buttons.

i'm assuming i will need to use some kind of intermediary device to recieve commands from the logitech, then send it to the relevent device in a regular Rs232 or IP command that it is able to interperet?

any help would be appreciated.
Post 2 made on Tuesday April 7, 2020 at 02:01
buzz
Super Member
Joined:
Posts:
May 2003
4,366
Are you a DIY or a Pro?
OP | Post 3 made on Thursday April 9, 2020 at 07:25
gciva
Junior Member
Joined:
Posts:
April 2020
2
DIY


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse