Post 1 made on Tuesday October 31, 2017 at 20:43 |
benjh1028 Long Time Member |
|
|
I have all commands working over IP except "power on". I've read the manual 1,00 times looking for something I missed such as standby mode, but to no avail.
Anyone here with a potential solution?
Thanks
|
|
Post 2 made on Tuesday July 17, 2018 at 08:48 |
Hey I was running into the same problem today do you remember what you found that worked Thanks
|
|
Post 3 made on Friday July 20, 2018 at 08:55 |
jeffwalker60 Lurking Member |
Joined: Posts: | February 2007 1 |
|
|
I am looking for the same thing. Any luck out there?
|
|
Post 4 made on Friday October 19, 2018 at 11:47 |
Barry Gordon Founding Member |
Joined: Posts: | August 2001 2,157 |
|
|
Many systems, to be "energy efficient", do not provide power to their network receiver until the unit is powered on. Some manufacturers provide a settings option to choose whether the IP receiver is always on or only after power is on.
|
|
Post 5 made on Wednesday November 14, 2018 at 03:31 |
SkankingBytes Lurking Member |
Joined: Posts: | November 2018 1 |
|
|
(@023PW) power command does not work on LAN and RS232. Also no answer on power request (@0?PW) when in standby mode. If you get 'ack' back your controlsystem know the power is on. Use a relay controlled power outlet when using a controlsystem. Inserting/removing a disc is only possible when power is on ;)
|
|
Post 6 made on Monday October 21, 2019 at 21:07 |
remoteCtrlAuto Long Time Member |
|
|
Relay controlled outlet. Type it into google
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.