Your Universal Remote Control Center
RemoteCentral.com
RS-232 & IP Control Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Sony Android TV IP Control
This thread has 6 replies. Displaying all posts.
Post 1 made on Sunday February 12, 2017 at 22:52
Krassyg
Long Time Member
Joined:
Posts:
April 2005
264
Any of you guys successfully control Sony over IP? I had two installations last year with the Android based Sonys and they always stop working after a few days of inactivity. Simple IP control and RS-232 is enabled, DHCP reservation, etc. I did them with IR in the end but I would love to have a reliable all IP solution(TV, Roku, Apple TV Sonos Integra and Tivo).
Post 2 made on Wednesday February 22, 2017 at 11:39
Total Control Remotes
Super Member
Joined:
Posts:
July 2006
2,987
I use Savant and RTI which can easily control th XBR B, C & D series televisions. In the least, the Sony app works well.

But it is contingent on many different settings being set to a certain way to achieve full feedback and control.
OP | Post 3 made on Monday March 6, 2017 at 08:47
Krassyg
Long Time Member
Joined:
Posts:
April 2005
264
Which settings? I had easy ip control on, eco mode off, DHCP reservation in the router, RS-232 control on. It would stop responding after a while anyway.
Post 4 made on Wednesday April 11, 2018 at 01:39
audio_inside
Lurking Member
Joined:
Posts:
February 2009
9
Were you using the pre-shared key method and it still dropped out?
Post 5 made on Friday April 13, 2018 at 09:08
Timmythekid6
Lurking Member
Joined:
Posts:
January 2018
5
Can anyone elaborate on the correct settings needed for RS232 control? I'm 90% sure I have everything set correctly yet I experienced the same issue as Krassyg. Everything worked fine controlling my XBR75X850E from an Extron MLC controller for about a month and now the TV doesn't respond at all.

I've been reading that the Sony RS232 ports only work intermittently. Even tech support at Extron said they had a rough time getting it to work. They said sometimes the RS232 port took commands and sometimes it didn't.
Post 6 made on Thursday June 21, 2018 at 03:16
Taytech
Lurking Member
Joined:
Posts:
June 2018
2
We have had 232 control of the Sony A1 OLEDs but it's pretty average and only has basic commands.
IP control has everything including Netflix direct launch and feedback of channel number, inputs etc.
If you can only do 232, get a IP to RS232 adapter from eBay. they are bullet proof and cost $30AUD
USR-TCP232
Post 7 made on Friday October 19, 2018 at 11:44
Barry Gordon
Founding Member
Joined:
Posts:
August 2001
2,157
Go to video-storm.com and look at their IRUSB dongle. I use one to control an Amazon Fire TV Cube and one to control a nVidia Shield. It is not obvious from the name of the device, but it will accept TCP/IP commands sent to the device over the network. I control both of these devices in my home theater using only TCP/IP. I am not sure if it will work with the Android-based Sony TV but I am sure their tech staff will know


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse