| Post 1 made on Wednesday October 27, 1999 at 20:31 |
mike m Historic Forum Post |
|
|
I would like to remove, disable diming from a wall switch.So the switch can be used on fluorescent lighting.
|
|
| OP | Post 2 made on Wednesday October 27, 1999 at 22:40 |
Daniel Tonks Historic Forum Post |
|
|
Sorry, you'll need to buy a new switch. It's different technology.
|
|
| OP | Post 3 made on Wednesday October 27, 1999 at 22:48 |
Chris Couture Historic Forum Post |
|
|
You could use a relay on it but I would get a new switch that's make for that type of lighting! If you wanted to use a relay, you would need a 120 volt relay with a 5 amp load rating. The 5 amp rating would be good for 500 watts or so. The coil would need to be rated at 120 volts (not 12 like some are). You could pick up one at Radio Shack for around $7.00 They are about 1" x 1" x 1 1/2".
Chris Couture
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
