Post 1 made on Wednesday October 20, 1999 at 00:33 |
I have IR controled curtains and i also have the ir543 is there a module to operate my verticals
Thanks Jerry
|
|
OP | Post 2 made on Wednesday October 20, 1999 at 08:16 |
Tom Keels Historic Forum Post |
|
|
|
OP | Post 3 made on Wednesday October 20, 1999 at 12:23 |
Roland S Historic Forum Post |
|
|
Hmm... I'm not sure if you will be able to control IR-controlled curtains with an X-10 remote via IR543.
(Anyone, please correct me if I'm wrong, because I don't have an IR543.)
The IR543 receives IR signals and converts them to X-10 signals. It cannot do the reverse (i.e. receive X-10 signals and convert them to IR signals).
One suggestion is to buy a Phillips Pronto remote (IR) which can learn your curtain's IR signals as well as control your X-10 modules (via IR543).
There are two brand of an IR-controlled curtain system (Makita Motorized Drape System & Drape Boss Drapery Controller) that can support X-10 by way of contact closure using an X-10 universal module.
I don't know if either is what you have, but if your system has some type of contact closure terminals, it's possible to incorporate an X-10 system.
Roland
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.