| Post 1 made on Sunday April 23, 2017 at 01:07 |
Spencer@SandS Lurking Member |
|
|
I am new to RTI programming and am having a difficult time finding IR codes for an LG TV - 65UH615A and a Cisco cable box - Explorer 4642HDC. Can someone point me in the right direction, please??
|
James |
|
| Post 2 made on Thursday May 4, 2017 at 01:10 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
Try some other models of the same brand...try some other Lg tv codes. Usually the ir codes are same over the years. Same with the cable box.
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 3 made on Wednesday June 7, 2017 at 14:17 |
You may need to learn the LG codes from the original remote. If it is one of their "magic" remotes or whatever they call it, it might be a little tricky, but possible. I had to do that for a top of the line LG a couple years ago as only a few codes from each code set seemed to work. Took a while to get it all right and never was able to get discrete power codes that worked so I created some if then logic to make discrete power codes.
Regarding the Cisco cable box, you can also try Scientific Atlanta codes. I found that a lot of those crossed over in the past.
Good luck!
|
John G in SD |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
