Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Help noob w converting to HEX
This thread has 3 replies. Displaying all posts.
Post 1 made on Sunday August 11, 2013 at 23:04
inline79
Lurking Member
Joined:
Posts:
August 2013
2
Dear Remote Gurus,

I'm working on a beautiful Denon AVC-3530G AV Amplifier but am looking for the darn remote code for the "Speakers A" and "Speakers B" switch so I can actually activate those outputs. I have a Marantz RC3200 I can program Hex codes with. I found hex codes on the site that will turn the thing on and do other things, but not switch the speaker B outputs on.

The AVC-3020 codes listed here work, but there isn't a speakers code:
[Link: remotecentral.com]

I found that the AVC-3030 is very similar, and there is a code for RTI here:
[Link: remotecentral.com]

But I don't have the software to open it. Could one of you open up that configuration and send or post any hex codes that aren't in the first link above?

Thanks!
Post 2 made on Monday August 12, 2013 at 01:16
Glackowitz
RC Moderator
Joined:
Posts:
May 2002
3,792
AVC-3030
Speaker A Toggle On/Off
0000 0068 0000 0020 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 0020 000A 004A 000A 004A 000A 004A 000A 0020 000A 004A 000A 004A 000A 004A 000A 0020 000A 0020 000A 0701 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 004A 000A 004A 000A 0701

Speaker B Toggle On/Off
0000 0068 0000 0020 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 004A 000A 004A 000A 004A 000A 004A 000A 0020 000A 004A 000A 004A 000A 004A 000A 0020 000A 0020 000A 06FF 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 0020 000A 0020 000A 0020 000A 0020 000A 004A 000A 0020 000A 0020 000A 0020 000A 004A 000A 004A 000A 06FF
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far.
OP | Post 3 made on Monday August 12, 2013 at 22:52
inline79
Lurking Member
Joined:
Posts:
August 2013
2
Thank you! The sound of relays clicking sounds so satisfying!
Post 4 made on Friday August 13, 2021 at 20:31
MisterVee
Junior Member
Joined:
Posts:
August 2021
3
Hi there.

This thread has helped me deal with the same problem on my avc 3020 that is missing a remote and had speaker B disabled.
I was able to input the Hex code into RCoid on my old Samsung S5 phone and create speaker A and B toggle buttons.

Now I need to toggle the Rear and Centre speaker outputs as these are also currently disabled.

I am also unable to view the RTI code for the avc 3030 as I do not understand what software to use to be able to view it.

Would it be possible for someone to open the file and post any relevant code for those commands please?
Or point me at the software I need to use on PC or Mac to be able to view the file.

Many thanks in advance.
Great work on the site here too. What a wonderful resource.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse