Post 1 made on Sunday February 22, 2009 at 16:40 |
theaterconcepts Lurking Member |
Joined: Posts: | February 2009 3 |
|
|
Using a t4 and rp6 on the new sunfire tgp401. captured the code 3 times and still have no response from the unit. I tried ir and rf. any help out there?
|
|
Post 2 made on Friday February 27, 2009 at 13:50 |
maverickmedia1 Long Time Member |
Joined: Posts: | February 2008 78 |
|
|
Have you tried RS-232 control yet?
|
Don't shoot the messenger!! |
|
Post 3 made on Saturday February 28, 2009 at 02:56 |
RTI Installer Super Member |
Joined: Posts: | March 2002 3,320 |
|
|
Look in the mega code list, Sunfire has a sucky volume ramp and other bugs so be warned
|
Never Ignore the Obvious -- H. David Gray |
|
OP | Post 4 made on Friday March 13, 2009 at 11:40 |
theaterconcepts Lurking Member |
Joined: Posts: | February 2009 3 |
|
|
problem solved. the hex codes that I captured were garbage all three times for some reason. called sunfire and they emailed me the hex codes and all works great.
|
|
Post 5 made on Friday March 13, 2009 at 17:08 |
ahentertainment Long Time Member |
Joined: Posts: | March 2008 39 |
|
|
Can you post the IR file my buddy just ran into the same problem.
thanks.
|
|
Post 6 made on Monday August 6, 2018 at 21:43 |
Andy Panda Long Time Member |
Joined: Posts: | August 2010 31 |
|
|
Hi,
Can you send me the remote codes for TGP-401 ? I have the pre-amp but no remote. Thanks.
|
Andy |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.