Your Universal Remote Control Center
Audio, Receivers & Speakers Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Rotel RSX 1055 Power Up Failure
This thread has no replies.
Post 1 made on Thursday March 26, 2015 at 18:22
Lurking Member
March 2015
Hello there

I have purchased used Rotel RSX-1055 amplifier today and it got some serious issue.

It just won't power up fully. When i push the power button the blue power button goes on like it normally should. Then I press the Power button on a remote - it clicks once, the power LED goes OFF and then ON again after few secs (this is normal behavior). But the screen stays blank, there is no any sound or noise from the speakers (if connected), and there is no second click (which normally turns on the amp).

I found several posts with similar problem, but no solutions or adequate suggestions. I know it could be the only way to take it to some sort of dealer or service, but I want to give it a try myself  

I have opened the main cover and found some dodgy marks around the capacitors on the Amp board (do they look ok?).

People say there are two fuses - I have seen only one, and it's ok.

Any ideas out there?

Thanks for any advice 

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse