Hi all I have the Yahmaha RX-V992
  and the  Charter OCAP–4 (C4000 & S4000) remote
   The remote takes 5 Digit codes and I have tryed to use
10030 and 10145 but thay do not work. I also did

1. Press AUX once
2. Press setup untill AUX blinks twice
3. Put in 991 and AUX blinks twice
4. press 3 for adio
5. press ch+ repitly untill the device trurns off

Was not able to finde the right code.  Can any one help.  I have looked at a lots of other Posts on this site and so fare none of them talk about 5 digit codes just 3 and 4 didgit codes. 

When I whent to my local Charter Cable office to get a replacement remote It came with the user gide for the wrong remote (UR4U–MDVR–CHD2) I have OCAP–4 (C4000 & S4000).  When I went back to get the right user gide the person working for Charter told me that this user gide is the right one and will work for it but I will not be able to test it because she was not infrunt of my AV equipment.

What a bunch of BS
   

The Yamaha codes for Audio equipment are 30176 and 31176. Have you tried those?

Thank you 30176 dose work. The only things I can control now are volume, mute, and I can switch from CD, V-AUX, DVD/LD, TV/DBS, and Tape. Not able to switch to the Tuner. Also Power dose not work.

Any help would be Grate

You can probably program buttons on the remote to do the functions you need.

Test any of the below codes by (make sure the remote is set to the Yamaha devic mode)
1) Tapping setup (don't hold it)
2) Entering one of the below 5 digit numbers. That should cause the associated action at the receiver.

You can assign these numbers semi-permanently to buttons by
1) Press Setup until 2 blinks
2) Enter 994
3) Tap Setup
4) Enter a 5 digit numbe from below
5) tap the button you want to send this signal. Can't be a device button.

VCR 1	00058
Higher Preset Numbers	00117
Lower Preset Numbers	00121
Select Preset Group A - E	00119
VCR 2	00123
Phono	00116
CD	00120
Tuner	00118
Select Tuner	00118
DVD	00122
Tape	00245
Vol+	00247
Vol-	00251
Mute	00244
Power On	00248
Power Off	00246
Power Toggle	00250
+	00103
-	00107
TV/DBS	00100
V-Aux	00104
Effect On/Off	00102
Sleep	00106
Test	00192
Dolby Digital	00061
Enhanced	00065
Movie Theater	00063
TV Sports	00067
Rock	00060
Jazz	00064
Stadium	00062
Disco	00066
Church	00125
Hall	00129
Ch+	00253
Up_Arrow	00253
Ch-	00001
Down_Arrow	00001
Speaker A	00255
Speaker B	00003
Down_Arrow	00252
Up_Arrow	00000
Play	00254
Reverse_Play	00002

Thank you so much for the help. That list of codes dose work. Now I have 1 remote for my home AV system.