Your Universal Remote Control Center
RemoteCentral.com
HDTV Reception Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
DTC100
This thread has 7 replies. Displaying all posts.
Post 1 made on Sunday November 28, 1999 at 09:14
JWM
Historic Forum Post
How can you get vga(rgb) to component video. Typical vga yo rgb adapters will not convert signal
OP | Post 2 made on Sunday November 28, 1999 at 11:20
wayne
Historic Forum Post
their working on it but not at this time
OP | Post 3 made on Monday November 29, 1999 at 22:47
arthurho
Historic Forum Post
I am having the same problem
I need VGA to Component video cable.
Is there a cable out there of a DSS receiver with component video.
OP | Post 4 made on Tuesday November 30, 1999 at 07:02
Kenny West
Historic Forum Post
I bought a VGA to BNC cable at Best Buy then got the BNC to RCA adapters at Radio Shack. may do what you need.
OP | Post 5 made on Friday December 17, 1999 at 13:35
dukehead
Historic Forum Post
First off Component and RGB+HV are the same ecept the HV sync is on the Green (G) see my post below about having a custom rgb+hv cable made for the DTC-100 and just have the custom cable company build it with sync on green, they should have the specs... if they don't find another company.. there only answer should be sure.. no problem
dukehead*******************************

I have the DTC-100 and the eliptical dish ordered from The Star Club in LA
([Link: estarclub.com])
They had lots of them paid only 650.00 for the whole thing including shipping , fast service
As for the DTC-100 VGA output it's easy .. look in the yellow pages under cable suppliers there is bound to be a company that makes custom cable assemblies ( Custom Cable ind. --in Tampa) the can make an industry standard VGA to RGB+HV cable the standard calls for BNC connectors but since they are custom building it for you have them put RCA connectors on it. They will be less problematic in the long run than the RS BNC to Phono plug converters. As any one who's been in the computer industry for years can tell you BNC's just get twitchy after awhile for no apperent reason
(10-base2 enet)The HBO channel on 509 looks great
also with the DTC-100 you can just leave the HD monitor switch on and sho all your SAT stuff thru the VGA port thus bypassing the internal scan conversion part on your internal line doubler which usually suck. I have a mitsu 65905. AWESOME picture from my Toshiba DVD with progressive outputs. the s-video is ok but as I said most internal line doublers SUCK. dukehead..
OP | Post 6 made on Tuesday March 7, 2000 at 14:51
Michael Eickemeier
Historic Forum Post
Component video (Y; R-Y; B-Y) is something completely different than RGBHV (VGA). No cable, custom or not, will be able to convert it. Electronics are needed. Check out this page:
[Link: audioauthority.com]
There are converters available for $130.00
OP | Post 7 made on Thursday March 9, 2000 at 22:57
rudolpht
Historic Forum Post
Audio Authority device works as advertised. Works great. Using a DTC-100 with a Toshiba TW40X81 since pResident's Day.
OP | Post 8 made on Friday March 10, 2000 at 22:41
Bryan
Historic Forum Post
The company you are looking for the Extron
(VGA to Componet)


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse