| Post 1 made on Saturday April 1, 2000 at 08:22 |
any one know how to. hook this box up to a receiver. Don,
|
|
| OP | Post 2 made on Sunday April 2, 2000 at 17:45 |
Don,
I hooked my box up this way:
1. Connect RCA audio cables (left & right)from the cable box's audio out connectors to the TV/Cable audio in connectors ( left & right)of my receiver. This will handle the analog audio signal.
2. Connect a coax digital cable from the digital audio out connector of the cable box to a digital coax input on my receiver. This will handle the Dolby Digital signal from the cable company.
3. Connect a video or s-video cable from the connector on the cable box to the video or s-video input on the receiver.
On my system I have to switch the audio signal fron analog to digital depending on whether I'm watching a digital or analog cable channel. There is quite an improvement with the digital sound.
Good luck!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
