 |
 |
|
|
HDTV Reception Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
DTC-100 and Mitsubishi WS65903
| |
|
| Topic: | DTC-100 and Mitsubishi WS65903 This thread has 4 replies. Displaying all posts. |
|
| Post 1 made on Saturday January 22, 2000 at 04:27 |
Antoine Vu Historic Forum Post |
|
|
I have DTC-100 and Mitsubishi WS65903 HDTV, with VGA to BNC-HV adapters for high definition signal.
1) Using the regular ANTENNA without activating HD MONITOR button in the front panel, all Channels work fine but they were not HD signal.
2) If HD MONITOR button in the front panel is activated, the TV screen goes blank!!!
**Questions: is it the ANTENNA? (I have a big good one on the roof)or is it the VGA to BNC-HV adapter? or are there any settings inside the TV or DTC-100 that need to be set? or are the two units not compatable? Please help!
***Anyway, all digital channels are about a little better than the picture from the cable but for sure it's not HD!!!
Thank you,
Antoine Vu
|
|
| OP | Post 2 made on Saturday January 22, 2000 at 13:40 |
cracker Historic Forum Post |
|
|
My brother owns this tv and we are waiting for high def here,notice the "we".
It should say something in the main menu about switching the input to high def(mits tv menu).Hope I remembered that right and hope that helps.!
|
|
| OP | Post 3 made on Sunday January 23, 2000 at 09:23 |
on that mits 65903..how do you force it into the true DTV mode not just a renamed input. any suggestions.
|
|
| OP | Post 4 made on Saturday February 12, 2000 at 20:52 |
You will need to go into the 'wimpy' service menu and choose input type as 1024 I think. It's been a while since I did this, but ifyou use a search engine for mitsu hd service mode you should come up with the right numbers. There are two modes, one is MENU 2 3 5 7 the other is the one you want. Sorry, that's the menu I don't regularly use.
One more thing, DO NOT MESS WITH THE MENU 2 3 5 7 settingsunless you know what you're doing.
|
|
| OP | Post 5 made on Monday February 14, 2000 at 16:23 |
Alfred Egan Historic Forum Post |
|
|
When a DTC100 is connected to a Mit xx805 or 905.
On the Mitsubishi input #1 is the HDTV input
from the 5 BNC inputs on the back panel. These are
the HDTV from the DTC 100.
If you are not using the HDTV function of the DTC
100. Normally you be connected to the input #2
of the Mits.
Therefore if I am watch regular TV or DTV on input
#2 and I push the HDTV button on the DTC100, my scren
goes blank untill I go to input #1.
Also the Mitsubishi powers up to input #1.
You also may notice that each HDTV signal may produce
a slightly different picture depending on how they
are upconverting.
Alfred Egan
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
