Anyoneknow how i program the remote for a ds 4280 to work my vcr and tv ?? I lost the documentation with the "how to and codes" Thanks !!

The manual and codes are located on the RCA website: www.rca.com

I would suggest that if you want/need codes in the future that you give the model of your TV and VCR to that the appropiate codes may be looked up.

Hi Tom,

Just checked and found that RCA no longer has the manuals on its site. If you give me the model you need to control, I will look them up for you.

Hi Bluesky,

the VCR is a JVC hr vp636U the tv is a Magnavox 27tp82 c104. to program i just hodl down the tv or vcr button on the remote and put in the correct code ?? Thanks for all your help

Bluesky,

are you still out there ??

Yes I am still here.

I will check out the codes in the next day or so and post them here for you. Sorry for the late reply -- have been on the road for last couple of days.

Tom,

I've got the manual handy. To program a TV or VCR code, the manual says:

1) Turn on the device to be programmed.
2) Press and hold the device button you want to program.
3) Enter the code.
4) Release the device button and press ON-OFF to see if the device responds. If not, press the device button and ON-OFF again.
5) If this still doesn't work, try another code.

The JVC VCR codes are: 0002, 0014, 0016, 0030, 0044, 0046, 2009, 2010, 2011, 2016, 2018, 2058, 2111, and 2123.

Magnavox TV codes are: 1004, 1006, 1008, 1019, 1062, 1068, 1069, 1074, 1075, 1076, 1077, 1088, 1089, 1131, 1130, 1132, 1133, 1134, 1183, 1184.

Hope this helps.

Thanks Bryan !!!