Leviton has released the IR codes for VIzia RF (Z-Wave) needed to program learning remote controls.

Vizia RF is a wireless Z-Wave based home control system. Within the system, they offer two intersting products that are wall mounted 4-button scene and 4-button zone controllers. Each of these controllers includes an IR port for receiving remote control commands to operate the system.

Using the IR code, you can control scenes and zones of lighting devices throughout the home.

The document that explains the IR codes can be foudnd on the Vizia RF website at this URL:

[Link: leviton.com]

Here's a direct link to the PDF that described the IR signal:
[Link: leviton.com]

Here is the data contained in the doc...

TIMING
Frequency = 38 KHz

"1" - 4 msec
500 usec = Tx Time
3500 usec = Pause

"0" - 2 msec
500 usec = Tx Time
1500 usec = Pause

Start Code 6 msec
500 usec = Tx Time
5500 usec = Pause

COMMAND CODES
Scene 1 Sequence
00000000 11101000
Scene 2 Sequence
00000000 00011000
Scene 3 Sequence
00000000 10011000
Scene 4 Sequence
00000000 01011000
Scene 5 Sequence
00000000 11100100
Scene 6 Sequence
00000000 00010100
Scene 7 Sequence
00000000 10010100
Scene 8 Sequence
00000000 01010100
MAX
00000000 11010000
DIM
00000000 10110000
BRIGHT
00000000 00110000
OFF
00000000 01100000