I have a universal remote control of type Jensen JER 321. I lost my sheet with all the codes on it. I have a Toshiba tv, could someone give me the necessary codes please?

"Hey,

I was in the same boat as everyone, and spent the last two days looking for instructions on how to program my JER-321 remote, with no success. I finally decided, as we need a new remote for our downstairs tv anyways, to buy another JER-321 remote. SO here are the instructions for the manual code search:


1.Manually turn on the component you want the remote to control.
2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.
3.While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
4.After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
5.Release both keys. The illuminated ON-OFF key remains on.
6.Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks and the next code in the list is sent. This process continues until all of the codes in the Code lists have been searched. If your component turns off, you have found the correct code.
7.Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored.

I know, I am the best :)

This should work for everyone. Hope this helps a lot of people out there.

Suzanne"

THANKS A LOT!!!!!!!!!