Post 1 made on Sunday December 31, 2006 at 23:39 |
Kayaflym Lurking Member |
Joined: Posts: | December 2006 1 |
|
|
Hi! I have a Direct TV remote and a Visco television. Does anyone know any codes for Visco? Or who makes Visco? Any help would be great. Thanks in advance:)
|
|
Post 2 made on Saturday February 10, 2007 at 08:38 |
cbrider Lurking Member |
Joined: Posts: | February 2007 1 |
|
|
I think they use NEC passwords. There is a message on the visco forum about remote codes. Check www.viscousa.com. the forum is on the support page. I am considering buying a Visco TV. What do you think about it? -cb
|
|
Post 3 made on Saturday February 10, 2007 at 10:08 |
springdav Lurking Member |
Joined: Posts: | February 2007 1 |
|
|
Yes, it's used NEC password. Try 10030, it works with mine.
Have one... no problem so far.
|
|
Post 4 made on Sunday February 11, 2007 at 20:22 |
King Kinght Lurking Member |
Joined: Posts: | February 2007 1 |
|
|
I got the Directv remote to work on my Visco TV Here’s how its works if you have a universal remote, on the top slide the switch to TV. Then press the mute and the select until your remote flashes twice after that press in the code 991 wait for the double flash and then press 1 and wait for the double flash again. Once that is done press the up channel until your TV shuts off and then press select. This process can take up to a half hour. This is how your remote scans for codes. It took me 5 minutes on the second try.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.