 |
 |
|
|
General Consumer Remotes Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
|
Philips Universal Remote Help
| |
|
| Topic: | Philips Universal Remote Help This thread has 403 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Friday March 25, 2005 at 09:59 |
Hello, I need some help. I have a Philips Universal Remote. I do not know what model it is. I have lost the manual to program it with, and since the remote has lost the code for my TV. Any recommendations on how to re-program my remote for my TV?
|
|
| Post 2 made on Friday March 25, 2005 at 15:19 |
if its same as mine hold down keys 1+3 together enter code and hey presto
|
|
| Post 3 made on Sunday March 27, 2005 at 08:46 |
 If this is the one you have see post# 344 for the codes.
Last edited by Tcahill
on March 18, 2008 20:32.
|
|
| Post 4 made on Friday April 8, 2005 at 14:48 |
can you e-mail me that list i need it for my remote i have been looking for it for awhile now and this is the first i have found for that remote
|
|
| Post 5 made on Friday April 15, 2005 at 15:13 |
Please email me the codes for this elusive remote, thank you. sick19@cox.net
|
|
| Post 6 made on Friday April 15, 2005 at 15:50 |
I will scan the codes and post a link shortly.
|
|
| Post 7 made on Friday April 15, 2005 at 17:14 |
|
| Post 8 made on Friday April 15, 2005 at 17:27 |
|
| Post 9 made on Friday April 29, 2005 at 13:03 |
Peter Wilson Long Time Member |
Joined:
Posts: | April 2005
15 |
|
|
try Jasco for codes and instr. try all codes for any given brand and device type (i.e.) Phillips, tv find the code that works the most functions as some of the codes for it may only power up/down channel/volume change, but may not allow input selection, pix control, etc to work. good luck...Peter
|
Pete WIlson |
|
| Post 10 made on Tuesday May 3, 2005 at 18:32 |
georgie jones Lurking Member |
|
|
On 03/27/05 08:46 ET, Tcahill said...
If this is the one you have I can email you a copy of the codes. hey could you please send me a copy of those codes as well, my email is suprachick545@yahoo.com
|
|
| Post 11 made on Tuesday May 10, 2005 at 16:41 |
klsakakelso Lurking Member |
|
|
|
| Post 12 made on Tuesday August 2, 2005 at 23:45 |
rulz_12 Lurking Member |
Joined:
Posts: | August 2005
1 |
|
|
Hello - I have this remote and I did not keep the code book. Could you please e mail me the codes for it? Thanks so much I'm talking about the same remote as in post #3 from Tcahill. darulz_12@earthlink.net
|
|
| Post 13 made on Friday August 5, 2005 at 06:42 |
mizzllat Lurking Member |
Joined:
Posts: | August 2005
2 |
|
|
The "elusive" remote control that is pictured is the Philips PHDVD5. The following is how the instruction manual says to go about searching for a code:
1. Manually turn on device to be controlled.
2. Press and hold the "Code Search" button until the red indicator light stays on, then release it.
3. Press and quickly release the desired ode button (TV, VCR, etc.). The red indicator light should blink once.
4. Press the "Channel Up" button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator light should blink off with each button press. If you accidentally overshoot the required code, press the "Channel Down" button to backtrack through the library until the device changes channel. Pressing "Channel Up" changes direction again.
5. Press and release "Mute" button to install the code.
If you wish to actually identify the code once this has been done, this is the procedure:
1. Press and hold the "Code Search" button until the red indicator stays on. Release the "Code Search" button.
2. Press and release the desired mode button (TV, VCR, etc.). The red indicator light blinks and then stays on.
3. Press and release the "Code Search" button. The red indicator light goes off.
4. To find the first digit for the code stored under the mode key pressed in "Step 2" press each numeric key from 1-9 in turn. When the red indicator light blinks off, the number you pressed is the first digit for the code you are searching for.
5. To find the second digit, repeat "Step 4," this time when the red indicator light blinks off, this is the second digit in your number.
6. Repeat again for the third digit in your code number.
I hope this helps anyone who might have this little unit. I love mine, but it sure can be a pain if you do not have the right information to control it!
|
|
| Post 14 made on Thursday August 11, 2005 at 15:30 |
s-n-jenterprize Lurking Member |
Joined:
Posts: | August 2005
2 |
|
|
On 03/27/05 08:46 ET, Tcahill said...
If this is the one you have I can email you a copy of the codes. please send me these codes. shaingriffith@mchsi.com
|
|
| Post 15 made on Tuesday August 16, 2005 at 06:02 |
panneman Lurking Member |
Joined:
Posts: | August 2005
2 |
|
|
On 03/25/05 09:59 ET, nickdanger said...
Hello, I need some help. I have a Philips Universal
Remote. I do not know what model it is. I have
lost the manual to program it with, and since
the remote has lost the code for my TV. Any recommendations
on how to re-program my remote for my TV?
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
