Trying to get my RU810 to control the Samsung SIR-S4040r DTV/Tivo receiver. I did a auto search and nothing came up. Samsung isn't even listed in the manual under "Satellite" codes.

Try VCR code 0635.

It said "not found"

First, is this the remote you have? Second are you using the VCR device key and is it still set to be a VCR? Each device can be remapped very easily as another. The tivo code is VCR0635, works on my RCU810 and with my Samsung 4040. The problem is it also controls my hughes HDVR2, Philips DSR7000, and my RCA DVr80, all at the same time.:(

yes, that is my remote. I never use my VCR so I will try and use that. Thanks, I didn't even think to try that. I'll try when I get home and post back results.

okay, that code worked. Do you know what buttons the "thumbs up" and "thumbs down" buttons are mapped to ? I don't have the original remote.

Sorry, the thumbs aren't there. Alot of commands aren't mapped using the tivo code present in this remote, like guide. I would replace this remote with the one-for-all URC-6131. With the 6131 what isn't mapped using the preset command, can be added via Advanced codes.

okay, thanks. You don't by chance know the codes for the thumbs up and down? I have a Pronto TSU3000 also that I use in another room and maybe I can get the pronto setup to use the thumbs up and down just so I can set up everything. You have to press ' thumbs down' 3 times and select enter to change anything.

A Pronto, can't help you there. I'm sure you can download a file from this site. Check for philips DSR-6000.

why the Phillips ??? I did find one file for the Pronto (searched for philips DSR-6000) and it does have the thumbs up and down icons. I'll try that out.

Its the oldest brand of tivo, there should be more of them.

okay, finally got everything working. Thanks for your help.