Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
1 remote - 2 sat receviers
This thread has 1 response. Displaying all posts.
Post 1 made on Tuesday December 7, 2004 at 08:15
autoeng
Lurking Member
Joined:
Posts:
December 2004
1
I just purchased a OVA 6131 modified that is working great and can control my Echostar 301 and 510 sat receivers individually. I had to change the address of the 510 to 2 but other than that, a painless setup.

I have a 6012 that I would like to keep around but am having problems getting it to work. I changed the CBL key to a second SAT key but I can't get both sat's to program. I can get the 301 programmed to either the SAT or CBL key with code 0775 but when I try to put in the 510 with 1005 or 1170 I get an error flash from the remote light and can't control it.

Any ideas. Should I set the 301 to address 2 and then the 510 to 1 and try that or am I out of luck? Out of curiosity I set the 510 to address 3 but still no luick.
Autoeng
Post 2 made on Tuesday December 7, 2004 at 11:00
edmund
Elite Member
Joined:
Posts:
April 2002
13,683
There's only one address in a non-hacked OFA remote. Unless you modify it,you're out of luck. You could send it in to UEI for an upgrade, it will come back as jp1 remote, with codes you need.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse