Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
RF problem with a MX800
This thread has 1 response. Displaying all posts.
Post 1 made on Saturday October 30, 2004 at 21:26
mikerodgers
Lurking Member
Joined:
Posts:
October 2004
5
I recently installed a home theater system for a customer that is controlled by a MX800. The problem I am having is with his Yamaha RXV-2400's power on command. It will work via IR, but the RF base will not repeat the signal.

One thing I just thought of would be to use a simple toggle power command (if one exists) for the power on, while keeping the discrete power off command I have currently.

Any ideas on fixing this issue? Has anyone run into a problem like this before with the MRF-200?

Thanks everyone!

-Mike Rodgers
Post 2 made on Thursday December 23, 2004 at 22:00
kdurigan
Lurking Member
Joined:
Posts:
December 2004
3
I assume you already got this working - a very old post... Be assured that the MX800 controlls the RXV2400 flawlessly. Yamaha has one of the most complete manals for discrete codes I have ever seen. I have all zones workinh, and all possible functions (even those that are not available on the Yahama remote) working on the MX800. Send me a direct response if you still need help.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse