Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Daikin FTYN25 IR remote control
This thread has 2 replies. Displaying all posts.
Post 1 made on Tuesday December 4, 2018 at 10:23
lexalexalexa
Lurking Member
Joined:
Posts:
December 2018
2
Hello to all!

I had this AC and want to control it via IR.
I can't find codes for it nowhere :(

When i learn a signal from IR-remote, I got the following sequence:

PWR
sendir,1:1,0,38000,1,1,176,98,14,14,14,36,14,36,14,14,14,36,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,36,14,14,14,14,14,36,14,36,14,36,14,36,14,14,14,36,14,14,14,36,14,14,14,14,14,36,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,36,14,36,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,36,14,36,14,14,14,14,14,14,14,761,176,3787
FAN_SPEED
sendir,1:3,0,38000,1,1,176,98,14,14,14,37,14,37,14,14,14,37,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,37,14,14,14,14,14,37,14,14,14,14,14,14,14,37,14,37,14,37,14,14,14,14,14,37,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,37,14,37,14,14,14,14,14,14,14,37,14,14,14,14,14,14,14,37,14,37,14,14,14,14,14,37,14,14,14,14,14,14,14,14,14,14,14,14,14,37,14,37,14,37,14,37,14,761,176,3787
TEMP_UP
sendir,1:1,0,38000,1,1,
176,98,14,14,14,37,14,37,14,14,14,37,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,37,14,14,14,14,14,37,14,37,14,14,14,14,14,37,14,37,14,37,14,14,14,14,14,37,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,37,14,37,14,14,14,14,14,14,14,37,14,14,14,14,14,37,14,37,14,37,14,14,14,14,14,37,14,14,14,14,14,14,14,14,14,14,14,14,14,37,14,14,14,14,14,14,14,762,
176,3787
TEMP_DOWN
sendir,1:1,0,38000,1,1,
176,98,14,14,14,36,14,36,14,14,14,36,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,36,14,14,14,14,14,36,14,36,14,14,14,14,14,36,14,36,14,36,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,36,14,36,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,36,14,36,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,761,
176,3787
MODE
sendir,1:1,0,38000,1,1,
176,99,14,14,14,36,14,36,14,14,14,36,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,36,14,36,14,14,14,36,14,36,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,14,14,14,14,36,14,14,14,14,14,36,14,36,14,14,14,14,14,14,14,36,14,14,14,14,14,14,14,36,14,36,14,14,14,14,14,36,14,14,14,14,14,14,14,14,14,14,14,14,14,36,14,14,14,36,14,14,14,766,
176,3812

This codes work (AC make a sound).
But when i send anyone command (not meaning what it will be) the AC change his power state (toggle power).

If i had a direct commands to "ON" and "OFF" AC, i think this will solve the problem.

Can anyone help in direct commands for my Daikin FTYN25 AC?
Post 2 made on Friday December 7, 2018 at 18:37
Lyndel McGee
RC Moderator
Joined:
Posts:
August 2001
12,992
What tool did you use to capture this signal and what tool/equipment are you trying to use to send codes to the unit? Are you using a Pronto Remote or some other piece of software/hardware?

I did find this thread talking about Daikin IR format having long IR sequences that may not be Pronto Compatible? Had you seen this thread as well?

[Link: remotecentral.com]

I think Daikin may have only a Power Toggle command based on what I read from above.
Lyndel McGee
Philips Pronto Addict/Beta Tester
OP | Post 3 made on Saturday December 8, 2018 at 09:49
lexalexalexa
Lurking Member
Joined:
Posts:
December 2018
2
To capture i using iLearn from GlogalCache. Then i send signal from IrScrutinizer throw GlobalCache WF2IR. For now i don't using any other hardware/software.

Thank you! Yes, i saw that thread. But no one IR-code from there are not work with my AC. And i purpose that something had changed from that time (i had AC 2014 release year), but, alike, this not true.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse