Hi guys, I need help I have a Cary 303/200 cd player the remote is useless, so I purchased a Pronto TS1000 with everything charger ect: I thought I could just instal one of the Philips/Marantz files into it and hope it would work, but no not that easy. I have the Cary remote codes but have no idea how to make a down loadable file/program to put into the Pronto like all the Philips/Marantz ones. I hope someone here can do it for me and put it into the files section so all out there can use it also as well as me under

Philips Pronto Classic Family
Device Configurations
Cary
CD Players


Here are the codes needed Cheers George

CARY CD303/200 IR Remote Codes
September 28, 2005

All codes - to Philips RC-5 standard

Key Printing FunctionSystem System Command
OPEN/CLOSE TRAY OPEN / CLOSE00 0EHPOWER POWER ON / OFF00 0CHSTOP STOP 00 13HPAUSE PAUSE 00 16HPLAY Play 00 17HMUTE MUTE 00 10HPREVIOUS PREVIOUS00 15HNEXT NEXT 00 14HREW REVERSE 00 11HFF FORWARD00 12H1 NUMBER KEY PAD 100 01H2 NUMBER KEY PAD 200 02H3 NUMBER KEY PAD 300 03H4 NUMBER KEY PAD 400 04H5 NUMBER KEY PAD 500 05H6 NUMBER KEY PAD 600 06H7 NUMBER KEY PAD 700 07H8 NUMBER KEY PAD 800 08H9 NUMBER KEY PAD 900 09H0 NUMBER KEY PAD 000 0AH+10 NUMBER KEY PAD +1000 00HREPEAT REPEAT 00 0DHDELETE DELETE 08 0DHPROGRAM PROGRAM 08 0EHTIME TIME 08 10HCLEAN CLEAN 00 0FHCD/COAXIAL INPUT SELECT 08 17H96kHz/24Bit 96kHz/24bit UPSAMPLING 08 13HVOLUME UPVOLUME UP 08 0FHVOLUME DOWNVOLUME DOWN 08 00H

Well that just jumbled up everything together when I posted, I can send a word doc with it all separated if anyone can help email me on
georgehifi at optusnet dot com dot au
Cheers George

Here is the direct link to the word doc if anyone can help.

[Link: caryaudio.com]

Cheers George

Use ProntoEdit 4.3 available from the files section. There's also a user's guide there that you can download.

Then, simply add an IR code to a button and click the 'RC5/6' button in the dialogs to be presented with another dialog where you select RC5.

Choose RC5 then enter the System and Command values you get from the Word Doc.

Even if someone gives you a file, that won't be good enough as you will still need to know how to 'merge' that content with your own. So, as a head start, I suggest you pick up the latest version of ProntoEdit from the files section for review.

There is also an FAQ (see link at bottom of the page) that will help get you started as well.

Thanks Lyndel, I have Pronto 4.0.5 is this the one I have tried with this and got all confused, all i was able to do was download and instal complete files from the files section.

Cheers George

Search this forum or see the FAQ for tips on 'Merge'.

[Link: remotecentral.com]

There is a printable PDF version of the FAQ available as well as the HTML version for which I have linked the 'Merge' topic above.

Most of what you need to get started can be found in an older ProntoEdit Manual. Here's the download link.

[Link: files.remotecentral.com]

Also, I may have my editors mixed up. I remember Marantz's TouchScreenSetup has the RC5/6 dialog but not sure about ProntoEdit. If you need ability to create RC5/6 codes in a user-friendly way, for sure you can use TouchScreenSetup to create a device page with all your IR codes and then 'Merge' the small config file you have created in TSS with your own in ProntoEdit (PE).

Well I must be thick I cannot do this, remember I have trouble with things like Word, and Spread Sheets to me are a nighmare,
I tried for hours yesterday and didn't make any progress with designing a user friendly screen with all the buttons. Let alone feeding all the RC5's codes and assigning them to the buttons of this [Link: caryaudio.com] code list for the Cary 303/200 cd player. I'll give it another go in a few days as my head hurts now.

Cheers George