Hi all.

I bought a TSU6000 online last year and it would not allow me to upload a new ccf. I tried using hyper terminal, but it just seemed to display garbage. I also could not update the firmware as I kept getting the reset button error. Last month, I finally got it to start a firmware update by taking the battery out and putting it back in. However, it then failed the firmware update and now just beeps 4 times. Everytime I try to update the firmware I get the reset error.

I have connected it to hyperteminal, but I am getting the same garbage as last time. The hyperterminal output is below.

I am using a usb adapter, but it works fine with my old TSU1000. I have also dug up an old laptop and used the serial connection directly.

Does anyone have any helpful suggestions or even know what "rooving" means?

It would be a shame to just throw the remote out.
Thanks for any help.

hyperterminal output
>>ÍÊ>6ÍÊ92ÍÊ96ÍÊ96ÍÊ9>ÍÊÊÍÊÍrooving...ÊÍrOOV.>>>>>>[>>].sONOR>V2.3.2>yMf>S>>.9>/
97/2>>9.96:59:>7.sRs>SK^ÊÍ22ÊÍ^SOS.>>6>>>[>>].V9.>>>>>>>>>>>>>>>>>.9>/97/2>>9.96
:5>:33.sRs>SK^ÊÍ32ÊÍ69ÊÍ_y^^.>9>>>>[>9].sONOR>V9.6>>>>>>>>>>.>6/>5/2>>2.95:>3:37
.sRs>SK^ÊÍ62ÊÍ_ssf.9>9>>>[26].N/y>>>>>>>>>>>>>>>>>.>5/99/2>>9.97:56:>7.sRs>SK^ÊÍ
52ÊÍ_Ufr.fy>>>>[922].v9.>2>s>>>sSf>^>v9.>.99/29/2>>>.93:>9:59.sRs>SK^ÊÍ

what are the settings on the COM port. get these from windows device manager. be sure to tell us what you have for all settings including handshake.