Post 1 made on Tuesday October 11, 2005 at 09:54 |
davros Lurking Member |
Joined: Posts: | October 2005 5 |
|
|
i have just bought a tsu 6000 from the us i had a bit of problem with the charger but now it is fixed is there any way i can change the fimware to the european version will this cause any problems it askes when i try to upgrade weather it is a tsu 6000 or an ru 970 is there any difference also the inbuilt codes for philips and all the others have vanished im a real newbee but i have the controler connected to the pc dont want to download anything till i know it will work ok HELP !!!!!
|
|
Post 2 made on Tuesday October 11, 2005 at 11:19 |
bomberjim Super Member |
Joined: Posts: | September 2001 3,894 |
|
|
I have a Marantz 9200 (Marantz version of the 6000) that is a US spec model. I have updated the firmware to the European version, when the Euro version was a newer firmware release than the US version and solved a specific problem. There were no ill effects.
In your case, I don't know what you'd gain by doing this, however. The 6000 is out of production, and the firmware is fully mature in both the US and Euro versions. Yes, the code databases are different, but changing your firmware won't change these codes. There are other differences in the remotes as well. RF frequencies for instance. Again this won't change via the firmware.
In short, while you SHOULD be able to load the Euro firmware, I see no advantage to doing so.
|
Jim L |
|
OP | Post 3 made on Tuesday October 11, 2005 at 11:25 |
davros Lurking Member |
Joined: Posts: | October 2005 5 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.