Post 1 made on Tuesday July 5, 2005 at 02:44 |
Peter1 Founding Member |
Joined: Posts: | March 2002 17 |
|
|
Something's loose inside and it's quite annoying while moving the remote around. I removed the 2 screws in the battery compartment but more is needed to open it. I found some old removal info (presumably for a TS1000) mentioning a 3rd screw under the label but there is no such screw on the 6000. Any ideas?
|
|
Post 2 made on Tuesday July 5, 2005 at 08:23 |
b00bie Founding Member |
Joined: Posts: | July 2001 396 |
|
|
I believe that the sound you are hearing is the ball bearing inside the pickup sensor moving around. However if you must open it you will need a torx T6 driver and since there are additional tabs holding the two halves together you will have to "pry" it apart. Searh for +replace +6000 +screen for the last year, that should give you detailed info.
Tom
|
|
OP | Post 3 made on Wednesday July 6, 2005 at 00:44 |
Peter1 Founding Member |
Joined: Posts: | March 2002 17 |
|
|
Awesome, thanks. Yes, it's probably the pick up sensor, it gets noisy when I tilt the remote.
thanks!
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.