| Post 1 made on Saturday April 23, 2005 at 14:50 |
StanofBklyn Lurking Member |
Joined:
Posts: | February 2003
3 |
|
|
Am getting a "RC device not connected or not responding" message. Have checked the connections and the Com hardware via Windows but no luck. Any idea?
Thanks,
|
|
| Post 2 made on Saturday April 23, 2005 at 15:33 |
bomberjim Super Member |
Joined:
Posts: | September 2001
3,894 |
|
|
Assuming you're not using a USB to serial adaptor, try tapping the screen just prior to starting communication. This "wakes up" the remote.
|
Jim L  |
|
| Post 3 made on Wednesday April 27, 2005 at 19:45 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined:
Posts: | December 2001
30,104 |
|
|
I got this on two separate remotes, and it happened the same day! Turned out that something had gone wrong on the system board.
Another thing that can happen, at least the Marantz version of these guys, is that the jack can partially break off of the board. If this happens, the cable plug will feel a bit loose compared to the way it was before.
|
A good answer is easier with a clear question giving the make and model of everything.
"The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
