Your Universal Remote Control Center
RemoteCentral.com
Philips ProntoNEO Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
NEED HELP PROGRAMMING IR CODES
This thread has 4 replies. Displaying all posts.
Post 1 made on Wednesday January 2, 2002 at 17:39
BULLDOG
Founding Member
Joined:
Posts:
January 2002
5
JUST RECENTLY GOT A PRONTO NEO.I DID NOT EXPIERENCE ANY PROBLEMS A LOT OF PEOPLE DID THOUGH. I CAN TELL YOU THIS MUCH... ITS NOT KID PROOF. SON DROPPED IT AND SHATTERED LCD. SO I GOT ANOTHER. I'VE IMPORTED SOME ICONS FOR TELEVISION STATIONS. I THOUGHT I KNEW HOW TO SET THE IR CODE, BUT WAS WRONG.
FOR EXAMPLE... TO SET STATION 13 I WOULD CHOOSE DIGIT 1 AS 1,PUSH OK THEN, DIGIT 3 AS SECOND DIGIT THEN OK. SO THERE WOULD BE 2 IR CODES IN PROPERTY BOX FOR THAT ICON. BUT WHEN I PRESS THE ICON THE REMOTE CHANGED IT TO STATION 33INSTEAD OF 13. ALL ICONS I PROGRAMMED WERE LEARNED BY SECOND DIGIT EX. 24 IS 44, 15 IDS 55 ANY TIPS?
Post 2 made on Wednesday January 2, 2002 at 19:41
vanderwielen
Founding Member
Joined:
Posts:
December 2001
40
bulldog, sound like you didn't link to the channel buttons on your tv, but rather 'added ir code' to change your channels. try 'linking' to the buttons on the tv page that contains them and be sure to put a delay between the links.
OP | Post 3 made on Wednesday January 2, 2002 at 22:35
BULLDOG
Founding Member
Joined:
Posts:
January 2002
5
thank you for the help on linking instead of ir commands. now that that worked i can sleep better!LOL
Post 4 made on Thursday January 10, 2002 at 11:32
legendreh
Founding Member
Joined:
Posts:
January 2002
14
I'm going crazy trying to program the the power button (the most important button) on my Sanyo PLV60 projector but with no sucess. All the other buttons will learn.

I have tried everthing. Radio Shack remotes, different angles, pressing the original remote first, different distances, standing on my head with my big toe curled, holding one eye shut during the first full moon of winter solstice. Still "failed" (that message and sound has gotten quite anoying).

I have extracted the learned codes from a ccf file for this projector, but I dont know what to do with them.

Whener I change/replace the xml file, neoedit can't open it.

I called the customer support line, but the idiot I talked to could barely read off the lame generic list that was sitting in front of him.

I would really appreciate any suggestions before I take this over priced gizmo straight to philips and personally shove it up the customer support guy's ...

Well lets just say I'm a tad frustrated
Post 5 made on Thursday January 10, 2002 at 11:51
allamand
Founding Member
Joined:
Posts:
October 2001
513
All I can say is I had tried and tried to learn the PIP for my Rca UTV and then I tried this:

I held down the PIP button on the remote before I pressed the button I wanted to learn it to on the Neo,
and it worked. I also thought I'd never learn the "Disc" button on my Technics 5 cd changer. But after about 20 straight tries, it learned it.

I have had better luck learning IR codes using the Original remote then my Cinema7 or MX-1000. Well I don't know if this helps you any, keep tring....

-steve
-steve


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse