Post 1 made on Monday June 1, 2009 at 21:25 |
hdtvluvr Long Time Member |
Joined: Posts: | September 2002 402 |
|
|
Ok, I've created the startup page and had Power and TV Power macros on the startup page, and on each device page (all were programmed so that Power turned everything on and TV Power turned everything off). This all worked until I used NeoSync to set the Startup page as the Device page. When I did this, I lost the Power and TV Power macros on all device pages including the Startup page. The programming still shows on the PC but I do not get the IR symbol in the upper right corner of the remote when one is pressed. Anyone else have this problem?
|
|
OP | Post 2 made on Saturday June 6, 2009 at 21:35 |
hdtvluvr Long Time Member |
Joined: Posts: | September 2002 402 |
|
|
Ok, I've worked some more on this and the macros for Power and TV Power were removed from all device pages in the hacked file. I opened the .ncf file with winzip and then opened the config.htm file located within. I checked these files for the hacked and non-hacked versions of the .ncf.
It appears that NeoSync strips out the code and button names for Power, TV Power and the TV source (button in lower right corner of the remote). I'm not sure how to put them back.
As a workaround I have just used the non-hacked file and added my startup page to the end of the Power and TV power macros. I also added 'Home' to the 2 middle buttons below the screen on all device pages that takes the user to the startup page. I also configured the .ncf file so that 'Startup' is the first device in the device tree below the Freedom device that gets created when you save a file. This at least makes the Startup device first on the Device page when someone presses 'Device' (the far right middle button).
If someone finds a way to put the 3 buttons back after using NeoSync please reply here.
Thanks
|
|
Post 3 made on Monday July 6, 2009 at 03:55 |
|
OP | Post 4 made on Thursday July 9, 2009 at 19:26 |
hdtvluvr Long Time Member |
Joined: Posts: | September 2002 402 |
|
|
Version 1.4 of NeoSync now supports this remote. It is in the file area.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.