| Post 1 made on Thursday October 12, 2006 at 07:29 |
deewee Lurking Member |
Joined:
Posts: | October 2006
2 |
|
|
On my NEO, I can't get a learned code on a button to operate twice without pressing any other button in between the 'learned' button presses.
It seems that my Thomson DVR (or is it the NEO) uses a parity bit in the IR codes, so every remote button should contain two codes, code A and code B, used alternatively.
I think that NeoHacker can manage to hold the code, but I don't know how!
I have used 'pronto2neo' to get these codes A and B and alternate A, but how/where do I put them in the ncf?
|
|
| OP | Post 2 made on Saturday October 14, 2006 at 19:00 |
deewee Lurking Member |
Joined:
Posts: | October 2006
2 |
|
|
Ok, thanks for the response (not)!
I have solved my own problem - which does not appear in the FAQ.
The A and B codes did not work when converted from 'pronto2neo' so I just programmed a second unused learned IR code as a second 'link' on each button instead. Its a bit long winded, but does the trick.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
