Your Universal Remote Control Center
RemoteCentral.com
Philips ProntoNEO Family Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Calibration issues with TSU500
This thread has 1 response. Displaying all posts.
Post 1 made on Wednesday August 16, 2006 at 12:10
TyleratRosen
Lurking Member
Joined:
Posts:
June 2006
2
I had to update firmware on 45 of these TSU500's, and when I did so I had to calibrate them by touching the top left and bottom right of the screen. 80% of the time the calibration "failed" and I had to try again, which sometimes meant repeating the process over 10 times. Most worked, but 8 out of those 45 I could either never get to calibrate, or when it finally succeeded it was off ... if I hit one button, it would activate the one to its left. I estimate it was off by about 1/4 an inch. If I tried to re-calibrate it in the setup, it would do the same... fail multiple times, work once, but still be mis-calibrated. I was hoping someone would know of a solution?
Post 2 made on Monday August 21, 2006 at 05:39
Crash_Pie
Lurking Member
Joined:
Posts:
August 2006
4
What did you use to touch the screen when calibrating? I found by using a fine tipped object (such as a pencil) I was able to make the calibration more accurate - better than my fat fingers anyway!
Crash

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse