Post 1 made on Wednesday January 30, 2002 at 22:59 |
hvega Founding Member |
Joined: Posts: | January 2002 3 |
|
|
Is it possible to for NEO to learn a sequence of multiple buttons for another remote? ala macro like
|
|
Post 2 made on Tuesday February 12, 2002 at 00:16 |
Don P Founding Member |
Joined: Posts: | February 2002 2 |
|
|
If you programmed the NEO to learn the other remotes commands that you want to duplicate, you should be able to configure an applicable button in the properties menu to create a link. Worked for me. ......Don
|
|
Post 3 made on Wednesday February 20, 2002 at 15:59 |
Hammy211 Founding Member |
Joined: Posts: | November 2001 89 |
|
|
Ummm... Anyway, I doubt you will be able to learn any macro, or as far as that goes any extended IR code. You will have to duplicate your macro by programming the NEO like you did your other remote. If you don't have those remote all you can hope for is that their codes are in the NEO database. Or someone has uploaded an NCF with your devices which is not likely. You could ask if someone has it to upload though.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.