| Post 1 made on Sunday May 29, 2016 at 00:18 |
Youthman247 Long Time Member |
Joined:
Posts: | February 2016
11 |
|
|
I picked up a Sherbourn PT-7010a and a MX500 Remote. According to the Sherbourn manual, the MX500 came preprogrammed with the AUX named 7010A. My remote says AUX so I need want to change the AUX to control the 7010a but cannot find the 3 digit code for the Sherbourn as it is not on the list. Any help would be greatly appreciated.
Michael
|
|
| Post 2 made on Sunday May 29, 2016 at 06:04 |
Daniel Tonks Wrangler of Remotes |
Joined:
Posts: | October 1998
28,780 |
|
|
You don't mention whether the MX-500 is the one that originally shipped with the PT-7010a or not. The one that shipped with the preamp would be custom modified for that purpose.
|
|
| OP | Post 3 made on Sunday May 29, 2016 at 16:26 |
Youthman247 Long Time Member |
Joined:
Posts: | February 2016
11 |
|
|
Hi Daniel, I'm guessing this is not the original remote since it does not have the 7010A pre-programmed. I notice in the manual that there are 3 digit codes for various manufacturers but Sherbourn is not listed.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
