Your Universal Remote Control Center
RemoteCentral.com
URC's Consumer Remotes Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
mx-350 PAIRED WITH mrf-260
This thread has 1 response. Displaying all posts.
Post 1 made on Saturday December 27, 2014 at 02:43
serp
Lurking Member
Joined:
Posts:
December 2014
1
2 things

first I can't figure out from the manuals how to program the remote for multiple TVs or cable boxes. I have it set to RF only for Cable and TV ad have tested it with the blasters on the MRF-260 for one set of box and tv, but how do I set it up to address the other two? I have two identical TVs and cable boxes.

Second I can't get it to control an Apple tv even after using learing. Results are reported as GOOD during learning but nothing works to control the Apple TV. Neither code worked either under AUX.

Thanks in advance for any help!!
Serp
Post 2 made on Saturday January 24, 2015 at 08:52
JoeFlabitz
Select Member
Joined:
Posts:
December 2008
1,517
For discrete control, you must use the emitters from the back of the MRF-260.

Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse