Post 1 made on Thursday June 14, 2012 at 13:50 |
Hi, I have been reading the posts on this forum to figure out the solution to my R50 troubles but am not able to figure it out. So I am starting a new thread. My setup is Sony Bravia, Onkyo 1009 and Dish Network Hopper HPR2000
I got a R50 and was able to program the TV and the Onkyo AVR without problems. With the Hopper (I had to enable IR control in the Hopper settings), I am able to program everything from the Hopper remote except the power button. This is confusing me. Here is how it goes for me: (1) I start adding a device on R50 (2) I select SAT->DISH->Name (3) I then start pushing the up-down cursor to cycle through the codes on the R50 display (4) there are a couple of matches and everytime there is a match the DVR/Hopper turns off (or on depending how the initial state is) (5) When I enter the 'Test' mode on the R50 to actually test if the matched code is a 'PASS' or not, the power on button on R50 will not turn on the Hopper.
From step #4 I can tell that the signal from R50 can turn on or turn off the hopper as long as I am cycling through the codes. But it wont do so when I use the power button on R50.
Once in the 'Test' mode, if I power on my Hopper with the Dish Network remote, and then use the R50 for testing all the other buttons for the Hopper, they all work.
What am I doing wrong? How can I get the power button on R50 operate my Dish TV Hopper? I am trying to get the R50 working without having to go up to something like MX450 or a Harmony remote.
Your help is much appreciated.
Thanks and regards.
|
Abhi |
|
Post 2 made on Friday November 7, 2014 at 21:21 |
schroetp Lurking Member |
Joined: Posts: | November 2014 1 |
|
|
Anyone know how to resolve this, I have the exact same problem and am ready to return the R50, since it will not work
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.